Technical Information Chapter 2
TiM55x/56x/57x
Operating principle of the TiM5xx
8015883/YZK8/2016-07-07 © SICK AG · Germany · All rights reserved · Subject to change without notice 7
The measurement method forms an average value from several pulses to determine indi-
vidual measured values.
At an angle resolution of 1°(TiM55x) and 0.3°(TiM56x/TiM57x), a measuring point is
formed from the average of 84 measurements.
TiM55x
84 submeasuring points
TiM5xx
0
40
80
120
160
200
240
01 23 5 7468
Range (m)
Spot diameter (mm)
Spot diameter of a submeasuring point.
Divergence 9.5 mrad, spot diameter on the front screen 6 mm
Elongation of the 84 overlayed submeasuring points in direction
of deflection at angle step 1°.
Divergence 27 mrad, spot diameter on the front screen 6.5 mm
910
280
320
To Next Page
Loading...
Need help?
General
