Position Description Characteristic
6 Connection 01: Cable 12-pin (2.0 m), open strand
10: Cable (approx. 0.9 m) with male connector, D-
Sub-HD, 15-pin
11: Cable (approx. 0.8 m) with M12 male connec‐
tor, 12-pin, D-coded
20: Rotating connection unit, 1 x M12 male connec‐
tor, 5-pin, D-coded (Power ); 1x M12 female connec‐
tor, 4-pin, A-coded (Ethernet)
7 Application 50: Measurement data supplier
8 Laser type 0: Pulse power up to 880 mW, pulse width up to
5 ns, pulse rate 500 kHz
1: Pulse power up to 880 mW, pulse width up to
5 ns, pulse rate 1,500 kHz
9 Color 01: Gray
NOTE
Not all combinations are possible according to the type code. The available device
variants can be found online at:
•
www.sick.com/TiM5xx
3.5 Product identification
The type label gives information for identification of the product variant.
TIM581-2050101
1099504
1118 0001
March 2018
1
2
3
4
5
6
8
7
9
25
7
1
Type code
2
Part number, serial number
3
Voltage supply, maximum power consumption
4
MAC address
5
Conformity mark/certification mark, symbol: Observe the operating instructions!
6
Production date
7
DataMatrix code with product data (part number, serial number, MAC address)
8
Manufacturer/production location
9
Conformity mark/certification mark
3.6 Principle of operation
3.6.1 Measurement principle
The device is an opto-electronic LiDAR sensor (laser scanner) that uses laser beams
for non-contact scanning of the outline of its surroundings on a plane. The device meas‐
ures its surroundings in two-dimensional polar coordinates, relative to its measurement
origin. Its measurement origin is marked by a circular indentation in the center of the
optics cover. If a laser beam strikes an object, the position of that object is determined
in terms of distance and direction.
PRODUCT DESCRIPTION 3
8025144//2021-07-21 | SICK O P E R A T I N G I N S T R U C T I O N S | TiM55x/56x/57x/58x
13
Subject to change without notice
To Next Page
Loading...
Need help?
General
