SICK TiM55 Series User Manual

Figure 3: The 2D LiDAR sensor measurement principle
3.6.2 Range finding
The device emits beams pulsed by a laser diode. If a laser pulse hits an object or
person, it is reflected on the surface of the object or person in question. The reflec‐
tion is registered by a photosensitive element in the device receiver. The device uses
SICK’s own HDDM/HDDM+ (High Definition Distance Measurement) technology. With
this measurement process, a measured value is formed by adding together multiple
single pulses. The device calculates the distance from the object based on the elapsed
time that the light requires between emitting the beam and receiving the reflection.
Radar systems apply this “pulse time-of-flight measurement” principle in a similar way.
3.6.3 Direction measurement
The device uses a rotating mirror to deflect the emitted laser beams, thereby scanning
its surroundings in a circular pattern. The measurements are triggered internally by an
encoder in regular angle increments.
The measuring procedure uses the averaging from multiple pulses to determine individ‐
ual measured values. A measuring point is the average value of several measurements
combined.
1
2
1
Device
2
Laser pulse
3 PRODUCT DESCRIPTION
14
O P E R A T I N G I N S T R U C T I O N S | TiM55x/56x/57x/58x 8025144//2021-07-21 | SICK
Subject to change without notice

SICK TiM55 Series Specifications

General

Brand	SICK
Model	TiM55 Series
Category	Accessories
Language	English