EasyManuals Logo
Home>Siemens>Telephone>Asterisk OpenStage 15

Siemens Asterisk OpenStage 15 User Manual

Siemens Asterisk OpenStage 15
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Administration
A31003-S2000-M102-3-76A9, 08/07/2009
3-16 Asterisk - OpenStage Family, Administration Manual
administration.fm
IP Network Parameters
3.3.2 Use DHCP
For an example configuration, see Section 2.3.8, “Example DHCP server configuration”.
If this parameter is set to "Yes", the phone will search for a DHCP server on startup and try to
obtain IP data and further configuration parameters from that central server.
If no DHCP server is available in the IP network, please deactivate this option. In this case, the
IP address, subnet mask and default gateway/route must be defined manually.
The following parameters can be obtained by DHCP:
Basic Configuration
IP Address
Subnet Mask
Optional Configuration
Default Route (Routers option 3)
IP Routing/Route 1 & 2 (Static Routes option 33)
SNTP IP Address (NTP Server option 42)
Timezone offset (Time Server Offset option 2)
Primary/Secondary IP Addresses (DNS Server option 6)
DNS Domain Name (DNS Domain option 15)
SIP Addresses / SIP Server & Registrar (SIP Server option 120)
Vendor Unique (option 43)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens Asterisk OpenStage 15 and is the answer not in the manual?

Siemens Asterisk OpenStage 15 Specifications

General IconGeneral
BrandSiemens
ModelAsterisk OpenStage 15
CategoryTelephone
LanguageEnglish

Related product manuals