Technical Description, Installation Instructions, Operation
39
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
There are two types of AS-i slave available:
S AS-i A/B slave
AS-i slave with extended addressing mode
S AS-i standard slave or AS-i analog slave
AS-i slave for the standard address area; if you use
this slave type, you cannot use an AS-i A/B slave
under the same AS-i address in the B address area.
Configuring the Properties of an AS-i Slave
By configuring the properties of the AS-i slaves, you can do the following:
S Store general information for the AS-i slaves
S Enter configuration data of the AS-i slaves
S Specify the I/O configuration
S Specify I/O address areas
To Next Page
Loading...
Need help?
General
