Table 3-4 T-X30 terminal strip for connecting auxiliary equipment
Supplying the auxiliary voltage Outgoing circuit for auxiliary equip‐
ment
Feedback: auxiliary equipment ON
Terminal Connector Terminal Connector Terminal Connector
.T–X30:6 L1 .T–X30:3 L1 .T–X30:1 Relay contact
max. 60 V DC
.T–X30:7 L2 .T–X30:4 L2 .T–X30:2
.T–X30:8 L3 .T–X30:5 L3
Note
The infeed required for the drive power supply must be provided externally.
For further details see: Interconnection diagram
3.1.6.35 Controlled outgoing circuit for auxiliary equipment 400 V 3 AC or 460/480 V 3 AC (option
N32)
This option provides a controlled output that is protected via the motor circuit breaker and is
used for operating external auxiliary equipment (e.g. separately-driven fan for motor, pumps,
and oil supplies).
The contactor is energized by means of an ON command on the converter. The OFF command
deactivates the contactor.
Table 3-5 Outgoing circuit for auxiliary equipment (option N32)
Controlled outgoing circuit for auxiliary equipment Setting range of the motor circuit breaker
400 V 3 AC, 50 Hz, max. 11 KW Cos phi = 0.8; 18 A to 25 A
460/480 V 3 AC, 60 Hz, max. 12.7 KW Cos phi = 0.8; 18 A to 25 A
Table 3-6 T-X30 terminal strip for connecting auxiliary equipment
Supplying the auxiliary voltage Outgoing circuit for auxiliary equip‐
ment
Feedback: auxiliary equipment ON
Terminal Connector Terminal Connector Terminal Connector
.T–X30:6 L1 .T–X30:3 L1 .T–X30:1 Relay contact
max. 60 V DC
.T–X30:7 L2 .T–X30:4 L2 .T–X30:2
.T–X30:8 L3 .T–X30:5 L3
Note
The infeed required for the drive power supply must be provided externally.
Description
3.1 Cabinet Details
SINAMICS PERFECT HARMONY GH180 6SR41 manufactured in NMA Nuernberg, Germany
Operating Instructions Rev.201706301306 53
To Next Page
Loading...
Need help?
General
