4.8.4 Transport Using a Fork Lift Truck
Drives from 2 000 kVA and approximately 7 100 kg weight
If you use a fork lift truck, be sure that the tines keep the following measurements:
● Tine Length at least 40 " (1 000 mm) long
● Tine width maximum 7 " (180 mm)
● Tine height maximum 2 " (50 mm)
● The tine spacing must be adjustable from 30 " to 50 " (760 mm to 1 270 mm)
WARNING
Transportation in accordance with proper procedures
The transport unit/cabinet is heavy. The center of gravity is in the upper half of the cabinet.
The equipment can tip over if it is not transported correctly or if the means of transport
used is not permittted.
Death, serious injury, or material damage can result.
Ensure that the transport unit/cabinet is only transported by trained personnel using a
permitted means of transport and permitted lifting equipment. The equipment must always
be positioned the right way up and must not be tipped.
7LQHOHQJKWPXVWEHDWOHDVW
vvPPORQJ
)RUN/LIW
7UXFN
7LQHZLGWKLVvvPPPD[
7LQHKHLJWKLVvvPPPD[
7LQHVSDFLQJPXVWDGMXVWIURP
vvWRvvWRPP
)RUN/LIW
7UXFN
:RRGHQ
%ORFN
6LGH
6LGH
&*
&*
Preparing for Use
4.8 Transportation and Handling
SINAMICS PERFECT HARMONY GH180 6SR41 manufactured in NMA Nuernberg, Germany
82 Operating Instructions Rev.201706301306
To Next Page
Loading...
Need help?
General
