70
Using several handsets
Gigaset SL100/SL150 colour / IM_en / A31008-M1572-R121-2-7619 / registration.fm / 28.10.05
Accepting/rejecting call waiting during an internal call
If you get an external call while conducting an internal call, you will hear the call wait-
ing tone (short tone). The caller's number will appear in the display if Calling Line Iden-
tification is enabled. If you reject the call waiting tone on your handset, it can still be
heard on other registered handsets.
Listening in to an external call
You are conducting an external call. An internal party can listen in to this call and can
speak as well. A signal tone indicates "listening in" to all call parties.
Precondition: The Listening In function is activated (factory setting: Off).
Activating/deactivating "internal listening in"
v ¢ í ¢ Add. Features ¢ Listening In
Internal listening in
On your handset you see In use. You wish to listen in to this external call.
either ...
Cancelling internal call, accepting external call:
[RRRRRRRRRRRRRRRRRRRRR]
Accept
Press the display key. The internal call is ended. You
are connected to the external caller.
or ...
Reject external call:
[RRRRRRRRRRRRRRRRRRRRR]
Reject
Press the display key. The call waiting tone is deacti-
vated. You are still connected to the internal caller.
~
Enter the system PIN (page 83) and confirm
(‰ =On).
a
Long press (back to idle status).
OK
c
Press the talk key. You can now listen in to the call.
All parties hear a signal tone.
Ending listening in:
a
Press the end call key (signal tone).
i
If the first internal party presses the "end call" key a, a signal tone
sounds. The handset that is "listening in" is still connected to the external
party however.
To Next Page
Loading...
Need help?
General
