94
Appendix
Gigaset SL100/SL150 colour / IM_en / A31008-M1572-R121-2-7619 / appendix.fm / 28.10.05
PC Interface
You can connect your SL 1 handset to a computer using a Siemens data cable (page 96).
Your computer can then communicate with your SL 1 using "Siemens Data Suite" (free
download available at http:\\www.siemens.com/gigaset-sds) and access the following
parameters and lists in the handset:
Reading out parameters
◆ SW version
◆ Type
◆ Manufacturer's code
Read/write access to:
◆ the directory
◆ the email directory
◆ the network access list
◆ the appointments list
◆ the last number redial list
Read/write access to other parameters:
◆ ringer settings
◆ volume settings
◆ loading melodies
◆ accepting calls and talking on the phone
Data transfer
Some functions involve the transfer of large volumes of data between the handset and
the external device. In this case the handset switches to data transfer mode, Data Trans-
fer appears in the display. In this mode, you cannot make any entries via the keypad and
incoming calls are ignored.
In the following situations, the handset switches to data transfer mode:
◆ Read/write access to the directory
◆ Read/write access to the email directory
◆ Read/write access to the network access list
◆ Read/write access to the the appointments list
◆ Read/write access to the last number redial list
◆ Loading melodies
If an error occurs during transfer, the handset automatically switches to idle status.
Making and accepting calls
If you dial a number from an external device or accept a call from one, the handset will
respond as if you had executed this function on the handset.
To Next Page
Loading...
Need help?
General
