Siemens MT SAS Series User Manual

27 / 60
Siemens Actuators SAS.., SAT.. for valves CE1P4041en
Smart Infrastructure Handling 2019-04-09
Set address "124":
1. Enable addressing mode
2. Enter the 1st digit: Press button 4x à LED blinks red each time the button is
pressed
3. Save 1st digit: Press button until LED is green – release button
4. Enter the 2nd digit: Press button 2x à LED blinks green each time the button is
pressed
5. Save 2nd digit: Press button until LED is orange – release button
6. Enter the 3rd digit: Press button 1x à LED blinks orange each time the button
is pressed
7. Save address: Press button until LED is red – release button
à The address is saved and displayed 1x for confirmation
Set address "50":
1. Enable addressing mode
2. Skip over 1st digit: Press button until LED is green – release button
3. Enter the 2nd digit: Press button 5x à LED blinks green each time the button is
pressed
4. Save address (skip 3rd digit): Press button until LED is red – release button
à The address is saved and displayed 1x for confirmation
Set address "5":
1. Enable addressing mode
2. Enter the 1st digit: Press button 5x à LED blinks red each time the button is
pressed
Save address: Press button until LED is red – release button
à The address is saved and displayed 1x for confirmation
3.2.3 Maintenance
The actuators are maintenance-free.
Mounting:
· Do not touch the valve coupling if the components (valve/pipes) are hot
· If necessary, disconnect electrical connections from the terminals
The actuator must be correctly fitted to the valve before recommissioning.
3.2.4 Disposal
WARNING
Te
nsioned return spring
Opening the actuator housing can release the tensioned return spring resulting in
flying parts that may cause injury.
●
Do not open the actuator body.
The device is considered electrical and electronic equipment for
disposal in terms of the applicable European Directive and may not
be disposed of as domestic garbage.
· Dispose of the device through channels provided for this
purpose.
· Comply with all local and currently applicable laws and
regulations.
Example

Siemens MT SAS Series Specifications

General

Brand	Siemens
Model	MT SAS Series
Category	Controller
Language	English