Chapter 2
Installing the Device
RUGGEDCOM RX1500
Installation Guide
14 Grounding the Device
Figure 10: Failsafe Alarm Relay Wiring
1. Normally Open 2. Common 3. Normally Closed
Section 2.4
Grounding the Device
The RX1500 chassis ground terminal uses a #10-32 screw. It is recommended to terminate the ground
connection with a #10 ring lug and torque it to 3.4 N·m (30 lbf·in).
Figure 11: Chassis Ground Connection
1. #10-32 Screw 2. #10 Ring Lug
Section 2.5
Connecting to the Device
The following describes the various methods for accessing the ROX II console and Web interfaces on the device.
For more detailed instructions, refer to the ROX II User Guide for the RX1500.
To Next Page
Loading...
Need help?
General