RUGGEDCOM RX1500
Installation Guide
Chapter 6
Certification
Standards Compliance 49
Certification
The RUGGEDCOM RX1500 device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
• Section 6.1, “Standards Compliance”
• Section 6.2, “Agency Approvals”
• Section 6.3, “EMC and Environmental Type Tests”
Section 6.1
Standards Compliance
The RUGGEDCOM RX1500 complies with the following standards:
• FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference on his own expense.
• Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
• Other
▪ IEEE 1613 (Electric Utility Substations)
▪ IEC 61850-3 (Electric Utility Substations)
▪ IEC 61000-6-2 (Generic Industrial)
Section 6.2
Agency Approvals
Agency Standards Comments
TUV UL 60950-1
CAN/CSA-C22.2 No. 60950-1
Approved
CE EN 60950-1, EN 61000-6-2, EN
55022, EN 60825-1, EN 50581
CE Compliance is claimed via
Declaration of Self Conformity Route
FCC Part 15, Class A ApprovedFCC
FCC Part 15, Subpart B Cellular LM Models RX1500PN-W11-XX
RX1500PN-W12-XX RX1500PN-W32-XX
To Next Page
Loading...
Need help?
General