Certification
SCALANCE XR-500
104 Operating Instructions, 05/2017, A5E03275845-11
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
Until 19.042016 the SIMATIC NET products described in these operating instructions meet
the requirements of the EC Directive:2004/108/EC "Electromagnetic Compatibility” (EMC
directive) and as of 20.04.2016 the EC directive 2014/30/EU.
You will find the current versions of the standards in the currently valid EC declaration of
conformity.
Safety of electrical equipment
In the version put into circulation by Siemens AG, the SIMATIC NET products described in
these Operating Instructions conform to the regulations of the following European directive:
● EN 60950-1
Information technology equipment - Safety - Part 1: General requirements
Low voltage equipment directive
Devices supplied with 100 to 240 VAC meet the requirements of the directive 2006/95/EC
"Electrical Equipment Designed for Use within Certain Voltage Limits” (Low Voltage
Equipment Directive). Conformity attested by compliance with the standard EN 60950-
1:2010.
ATEX (explosion protection directive)
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subasseblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages of Siemens Industry Online Support
(http://support.automation.siemens.com/WW/view/en).
Enter the document identification number C234 as the search term.
To Next Page
Loading...
Need help?
General