Technical data
8.5 Switching properties
SCALANCE XR-500
Operating Instructions, 05/2017, A5E03275845-11
93
The properties listed below apply to the SCALANCE XR-500.
Table 8- 1 Switching properties
Max. number of learnable ad-
dresses
16 000
Can be configured (default value: 40 seconds)
Switching technique Store&Forward
Table 8- 2 Reconfiguration times for redundancy mechanisms
Reconfiguration times in ms
Table 8- 3 Full wire speed switching
Number of frames per second
Note
The following applies for SCALANCE XR
-500:
The number of SCALANCE XR
-500 modules connected in a line influences the frame delay.
hrough the switch, this is delayed by the Store&Forward function of
-500 by 25-70 microseconds (at 1000 Mbps).
To Next Page
Loading...
Need help?
General