Siemens SIMATIC CPU 1515SP PC2 F User Manual

CPU 1515SP PC2 (F/T/TF)
42 Operating Instructions, 09/2018, A5E42603425-AA
Commissioning
8
8.1
Notes on commissioning
WARNING
Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
• Do not commission the device unless it is fully mounted and connected according to the
specifications in the section Wiring (Page 36).
• Before commissioning, please consider the effects on other devices in the plant.
NOTICE
Condensation in the device
Damage to the device due to condensation if the temperature between transport or storage
and the installation point differs.
Before commissioning the device, leave it to stand until it is dry.
NOTICE
Data loss
Data loss may occur if write filters are used incorrectly.
Therefore, note the information on write filters.
The following configurable write filter is available under Windows 10:
• Unified Write Filter (UWF) (Page 57)

Siemens SIMATIC CPU 1515SP PC2 F Specifications

General

Brand	Siemens
Model	SIMATIC CPU 1515SP PC2 F
Category	Control Unit
Language	English