Siemens SIMATIC CPU 1515SP PC2 F User Manual

Maintenance
11.4 Updating software
CPU 1515SP PC2 (F/T/TF)
62 Operating Instructions, 09/2018, A5E42603425-AA
11.4
Updating software
Note
When you update software (such as Windows, drivers, BIOS,
etc.), always start the
CPU
1515SP PC2 in the GRUB menu in Windows mode.
Information on updating software for the respective product can be found on the Internet
(https://support.industry.siemens.com/cs/ww/en
).
HMI devices
During the installation, make sure that you always use the latest drivers for the HMI devices
used (SIMATIC Flat Panels).
Before you install a new driver version, you must uninstall the old driver version in order to
ensure proper operation.
You can download the current driver software from SIMATIC Product Support.
11.5
Windows 10 IoT Enterprise (64-bit)
The Windows 10 IoT Enterprise operating system (64-bit) is pre-installed on the
CPU 1515SP PC2.
Windows language packs
English and German are available as the basic language for the installation of the Windows
operating system.
After initial commissioning of the CPU 1515SP PC2, additional operating system languages
can be installed. Note that you need administrator rights to install language packages.
The following language packs are contained on the restore USB stick under
\Packages\x64\LanguagePack:
● Traditional Chinese
● Simplified Chinese
● German
● English
● French
● Italian
● Spanish
Installing languages
Use the Windows function "Start > Settings > Speech Recognition, Region, Date >
Languages" to install a language pack.

Siemens SIMATIC CPU 1515SP PC2 F Specifications

General

Brand	Siemens
Model	SIMATIC CPU 1515SP PC2 F
Category	Control Unit
Language	English