CP 1243-1
Operating Instructions, 12/2016, C79000-G8976-C365-02
91
The following diagnostics options are available.
For information on the LED displays, refer to the section LEDs (Page 22).
STEP 7: The "Diagnostics" tab in the Inspector window
Here, you can obtain the following information on the selected module:
● Entries in the diagnostics buffer of the CPU
● Information on the online status of the module
STEP 7: Diagnostics functions in the "Online > Online and diagnostics" menu
Using the online functions, you can read diagnostics information from the CP from an
engineering station on which the project with the CP is stored. You obtain the following static
information on the selected module:
● General information on the module
General information on the module
● Diagnostics status
Information on the diagnostics status
● Ethernet interface
Address and statistical information
● Industrial Remote Communication
Here, you obtain specific information on the WAN interface and other parameters of the
CP. The entry has the following subentries:
– Partner
Information about the address settings of the partner, connection statistics,
configuration data of the partner and other diagnostics information.
– Data point list
Various information on the data points such as configuration data, value, connection
status etc.
– Device-specific events
Information on CP-internal events
To Next Page
Loading...
Need help?
General
