Siemens SIMOCODE pro Manual

Introduction
1.1 Important information
SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002
11
Scope
This manual applies to the modules of SIMOCODE pro Safety with the following article
numbers:
● 3UF7320-1AB00-0 (product version E01 and later)
● 3UF7320-1AU00-0 (product version E01 and later)
● 3UF7330-1AB00-0 (product version E01 and later)
● 3UF7330-1AU00-0 (product version E01 and later).
Siemens reserves the right to issue a Product Information which contains up-to-date
information about new components and new product versions of components.
Manual Collection
A Manual Collection (https://support.industry.siemens.com/cs/document/109743951), a
collection of the following five SIMOCODE pro manuals, is available in Industry Online
Support:
● SIMOCODE pro - 1 Getting Started
● SIMOCODE pro - 2 System Manual
● SIMOCODE pro - 3 Parameterization
● SIMOCODE pro - 4 Applications
● SIMOCODE pro - 5 Communication.
Orientation aids
The manual contains various features supporting quick access to specific information:
● Table of contents at the beginning of the manual
● Comprehensive index at the end of the manual for quick access to information on specific
subjects
Standards
The safety-specific technical data contained in this manual refer to the following standards:
● ISO 13849:2015
● IEC 61508-1:2010
● IEC 61508-2:2010
● IEC 61508-3:2010
● EN 62061:2005
● DIN 60204-1:2016.

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English