Siemens SIMOCODE pro Manual

SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002
93
Technical data
10
10.1
Technical data of the DM-F Local and DM-F PROFIsafe fail-safe
digital modules
Technical data of the DM-F Local and DM-F PROFIsafe fail-safe digital modules
Table 10- 1 Technical data of the DM-F Local and DM-F PROFIsafe fail-safe digital modules
Mounting
Snap-mounted onto 35 mm DIN rail or screw-mounted using additional push-in
lugs
Enclosure width
45 mm
System interfaces
For connection to
• a basic unit
• another expansion module
• a current measuring module or current/voltage measuring module
• the operator-control block
Permissible ambient temperature
In operation -25 °C ... +60 °C
During storage and
transportation
-40 °C ... +80 °C
At installation altitude above sea level
≤ 2000 m
≤ 3000 m
Max. +50 °C (no protective separation)
≤ 4000 m
Max. +40 °C (no protective separation)
Degree of protection (according to
IEC 60529)
IP 20
Shock resistance (sine pulse)
15 g / 11 ms
Mounting position
Any
Frequencies
50/60 Hz ± 5 %
EMC interference immunity
in
accordance with
IEC 60947-5-1, Edition 3.1:2009, SN 27095:2006, IEC 61326-3-1:2008,
IEC 62061:2005
Rated control supply voltage U
s
according to DIN EN 61131-2
110 V - 240 V AC/DC,
50/60 Hz
24 V DC
Operating range
• 24 V DC: 0.8 to 1.2xU
s
• 110 V to 240 V AC/DC: 0.85 to 1.1xU
s

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English