7
1-71
Siemens AG 1998 All Rights reserved 6SN1197–0AA00 02.98 Edition
SIMODRIVE 611 (PJ)
Control components
Feed control with user–friendly interface and analog set-
point interface 6SN1118–0AA11–0AA1
A control module with user–friendly interface is available when using1FT5...
motors. It is only available as 1–axis version. An additional parameter board is
required, which can be used to set all of the axis–specific settings. It can be
inserted from the front.
This control board can be optionally expanded with the main spindle function
option board to be able to handle the requirements of main spindle operation.
To Next Page
Loading...
Need help?
General