Siemens SIMOTICS S-1FK2 Series User Manual

1FK2 synchronous motors for SINAMICS S120
Configuration Manual, 06/2019, A5E46927724B AB
93
Preparation for use
7
7.1
Transporting
Note
Comply with the local national regulations for the tran
sportation of motors.
● Use suitable load suspension devices when transporting and installing the motor.
● Do not lift the motor by the connector.
● Transport the motor carefully.
Lifting and transporting with lifting slings
You can lift and transport the motor using lifting slings.
WARNING
Incorrectly dimensioned or incorrectly used lifting slings
If lifting slings are incorrectly dimensioned or incorrectly used, the motor can fall and cause
death, severe injury and/or damage to property.
• Only use lifting slings that are suitable for the weight of the motor.
• Attach the lifting slings as shown in the figure "Lifting and transporting with lifting slings".
Figure 7-1 Lifting and transporting with lifting slings (example diagram)

Siemens SIMOTICS S-1FK2 Series Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FK2 Series
Category	Servo Drives
Language	English