Description
1.7 Type plates
SIMOTION D4x5-2
28 Manual, 02/2012
1.7 Type plates
Side-mounted type plate
The following figure shows the information contained on the type plate mounted on the side
of the housing.
0RGXOHGHVLJQDWLRQ
2UGHU1R
6HULDOQXPEHU
&7LFN
F8/XV
+DUGZDUHYHUVLRQ
%,26YHUVLRQ
Figure 1-5 Type plate using the D445-2 DP/PN as an example
Note
You might need to access the information provided on the side-mounted type plate after the
installation. The type plate is located on the right side of the module housing and is covered
by a SINAMICS S120 module when mounted. For this reason, we recommend that you
make a note of any required information prior to assembly.
Note
The information contained in each field of the type plate on your actual control unit may differ
from that presented in this manual (for example, a later product version, approvals and
marks that have not yet been granted, e.g. C-Tick, etc.).
To Next Page
Loading...
Need help?
General
