Description
3.2 Illustration
NCU 7x0.2
20 Manual, 02/2011, 6FC5397-0AP20-0BA0
3.2 Illustration
Control Units without PROFINET
The following figure shows an NCU 730.2 with its interfaces and control and display
elements (fault displays and status indicators). Please ensure that the structure of the NCUs
is virtually identical. There are only a few discrepancies, as follows:
● The NCU 710.2 has 4 rather than 6 DRIVE-CliQ interfaces.
● Deviations with NCU 710.2 and NCU 720.2:
– No cooling fins
– Layout of control and display elements behind the blanking plate (see Chapter
Position of operator control and display elements (Page 24))
To Next Page
Loading...
Need help?
General
