3. Change the value 09 to 03.
4. Start the service again. The connection is established.
RSA certificate not available/not up-to-date
For the SSL communication between server and SINUMERIK controller, you require a
certificate with a 2048-bit length. If you use a certificate with 1024-bit length, no connection is
established between server and client.
7.2.3 Integrating the client setup as external applications
Introduction
You have the option of calling the client setup from other applications, e.g. via TRANSLINE
2000 HMI PRO CS.
The call is configured via the TRANSLINE user interface.
Setup client with HMI-Advanced
Within the external application, a softkey must be configured, which starts the "iac.exe" file.
Setup client without HMI-Advanced
Within the external application, the "MhCtrlr.exe" file must be configured as a background
process with the name "MhController".
Installing SINUMERIK Integrate
7.2 SINUMERIK Integrate with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
166 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
Need help?
General
