Siemens SINUMERIK ONE MCP 2400.4c Installation Manual

2.4 Overview of the client version and required TLS/SSL
Overview
The following tables show which protocols are required to ensure the data exchange between
a client and the server.
Manage MyResources
Client version TLS 1.0 TLS 1.2 SSL Proxy
SINUMERIK Integrate Operate Client V02.00.06.49 X X -
SINUMERIK Integrate Operate Client V03.00.06.22 X X -
SINUMERIK Integrate Operate Client V02.00.06.48 X - X
SINUMERIK Integrate Operate Client V03.00.06.21 X - X
SINUMERIK Integrate HMI-Advanced client (Windows
7 SP1)
X X -
SINUMERIK Integrate HMI-Advanced client (Windows
XP SP3)
X - X
SINUMERIK Integrate HMI-Advanced client (Windows
XP SP2)
- - X
SINUMERIK Integrate HMI-Advanced client (Windows
NT)
- - X
Optimize MyProgramming /NX CAM
Client version TLS 1.0 TLS 1.2 SSL Proxy
SINUMERIK Integrate Operate Client V02.00.06.49 X X -
SINUMERIK Integrate Operate Client V03.00.06.22 X X -
SINUMERIK Integrate Operate Client V02.00.06.48 X - X
SINUMERIK Integrate Operate Client V03.00.06.21 X - X
Introduction
2.4 Overview of the client version and required TLS/SSL
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 23

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English