Operating Instructions SIPLUS CMS4000 IFN AI-D
SIPLUS CMS4000 IFN AI-D
Operating Instructions, 07/2021, A5E32612781A-AB
5
1 Preface
1.1 Purpose of this Document
This operating instructions support you to operate the Media Converter Node SIPLUS
CMS4000 IFN ANALOGINPUT-DISTANCE, named IFN AI-D as peripheral device in the
System SIPLUS CMS4000.
1.2 Required Basic Knowledge
Basic knowledge of automation technology and equipment condition monitoring is nec-
essary.
This operating instruction contains a description of the components, which are valid at
the time of publishing the manual. We reserve the right, to enclose product information
with current information to new components and updated components.
1.3 Validity of this Document
This document is valid for the Interface Node IFN AI-D.
1.4 Modification compared with the Previous Version
- None
Notice
You will find the version of the operating instructions in the number of the footer: A5E32612781A-AB.
1.5 CE Marking
The Interface Node IFN AI-D meets the requirements and objectives of the EG-Guideline
according to 2004/108/EG.
1.6 Standards
You will find detailed information in chapter 6.1 of this operation instruction.
Notice
The specified concessions are only valid according to an authorized label on the product.
1.7 Classification of Information
Additional to this operation instruction, you need the operation instructions of
SIPLUS CM X-Tools.
To Next Page
Loading...
Need help?
General
