SITOP PSU6200 1ph
Manual, 03.2019, A5E44623264-1-76
9
Description, device design, dimension drawing
2.1 Device description
SITOP PSU6200 is a primary-clocked power supply for connection to a 1-phase AC line
supply and a DC supply. An electronically regulated DC voltage that can be set via a
potentiometer is available at the output of the device. The output of the device is isolated,
no-load proof and short-circuit proof. The LED display indicates the operating status. The
operating state of the device can be processed via the signaling contact.
Signaling contact (13, 14)
Potentiometer, 12 V - 15.5 V or 24 V - 28 V
Indicator light, diagnostics monitor (O.K., LOAD)
Diagnostics interface (COM)
DC voltage level increase (HV)
Figure 2-1 Design
To Next Page
Loading...
Need help?
General
