Engineering and remote access
3.7 Web server
SITOP UPS1600 / UPS1100
144 Manual, 04.2017, A5E37775406-8-76
● Remaining buffer time
Note
From the instant in time when the SITOP
UPS1600 is switched over into the buffer mode,
to determine the expected buffer time, instead of the expected buffer current, the actually
measured buffer current is used.
● Current input voltage
● Output voltage
● Load current
Viewing the energy storage data
Figure 3-3 Diagnostics energy storage devices
1. Select menu "Diagnostics"
2. Select the "Energy storage" entry under "Operating data" in the navigation.
Here, you can find the following information about the connected energy storage devices:
● Order number
● Serial number
● SW version
● HW product version
● Battery charge level
● Battery temperature
● Measured charge current
● Battery voltage
To Next Page
Loading...
Need help?
General
