Siemens Vector Control User Manual

Parameterization 05.2006
6SE7087-2JD60 Siemens AG
8-12 Operating Instructions SIMOVERT MASTERDRIVES
8.3.3 Parameterization
8.3.3.1 Structure of the parameter lists, parameterization with DriveMonitor
Parameterization using the parameter list is basically the same as
parameterization using PMU (See Chapter 6 "Parameterizating Steps").
The parameter list provides the following advantages:
♦ Simultaneous visibility of a larger number of parameters
♦ Text display for parameter names, index number, index text,
parameter value, binectors, and connectors
♦ On a change of parameters: Display of parameter limits or possible
parameter values
The parameter list has the following structure:
Field
No.
Field Name Function
1 P. Nr
Here the parameter number is displayed. You can only change the field in
menu Free parameterization.
2 Name Display of the parameter name, in accordance with the parameter list
3 Ind
Display of the parameter index for indexed parameters. To see more than
index 1, click on the [+] sign. The display is then expanded and all indices of
the parameter are displayed
4 Index text Meaning of the index of the parameter
5
Parameter
value
Display of the current parameter value. You can change this by double-
clicking on it or selecting and pressing Enter.
6 Dim Physical dimension of the parameter, if there is one

Siemens Vector Control Specifications

General

Brand	Siemens
Model	Vector Control
Category	Media Converter
Language	English