If a radio channel is defined as a P25 Conventional Digital Channel, it will only receive
P25 digital signals.
If a radio channel is defined as an Analogue FM channel, it will receive both P25
Digital* and Analogue FM signals.
A radio channel defined as a P25 Trunked network will automatically start searching
for the pre-programmed network, and only receive signals from that network once it
has service.
Note:-When an Analogue FM channel is selected and in Monitor mode, all
unencrypted digital P25 traffic will be heard regardless of NAC or Talk Group.
5.2. ZONE MENU
The Zone Screen is used for changing Zones. A Zone is normally defined as a group of
radio channels with a common operational role.
When the ‘Zone’ menu option is displayed, press the OK button to enter the ‘Zone’
select screen.
Once the Zone menu appears, press the ▼ and ▲ keys to choose the required Zone.
Press the OK key to select the required Zone. The radio will return to the channel
screen and select the first channel in the new Zone.
Direct access to the Zone menu from other screens can also be programmed to one of
the function buttons with the FPP.
Doc Number: TNM-U-E-0055 ISSUE 4.0 Page 31
To Next Page
Loading...
Need help?
General
