The entered digits can be deleted by using the ▼ key.
Press the ‘M’ or Back key to return to the Destination Selection pop-up menu screen.
Press the ‘Reset’ function key (if configured) to return to the default screen display.
Press the OK key to send the message to the entered unit ID (providing it is valid). The
radio will then return to the default screen.
If the entered Unit ID is not valid, or the IP address is not defined, an error beep will
sound.
Sending a short message or text message can fail if the destination radio is not
available.
5.17. SCAN EDIT MENU
The Scan Edit menu allows the user to add or delete channels to or from a Scan Group.
Any changes to a Scan Group are stored permanently in the radio.
From the main channel screen, press the ‘M’ key to enter Menu Mode. Use the ▼ /▲
keys to scroll through menu options. With the Scan Edit menu option displayed, press
the OK key to enter the ‘Scan Group Edit’ screen.
5.17.1. Scan Group Edit Screen
When selected, the Scan Group Edit screen displays the details of a channel within the
Scan Group.
Doc Number: TNM-U-E-0055 ISSUE 4.0 Page 58
To Next Page
Loading...
Need help?
General
