The priority level of the channel to add to the scan group is selected from this screen.
The options are:
• Member. A member channel is a normal channel with lowest priority in the scan
group.
• Prty1. A Priority 1 channel will have the highest priority in the scan group.
• Prty2. A Priority 2 channel will have the second highest priority in the scan group.
Use the ▼ /▲ keys to select the priority of the channel and press the OK key. The
‘Scan Group Add’ screen will be displayed.
Press the ‘M’ or Back key to return to the next highest menu screen.
Press the ‘Reset’ function key (if configured) to return to the default screen.
5.17.2. Scan Group Add Screen
The Scan Group Add screen shows channels that are not members of the Scan Group.
The second line of the display shows the name of a channel that is not a member of
the Scan Group.
Other channels that are not members of the scan group can be selected using the
▼ /▲ keys.
Press the ‘Reset’ function key (if configured) to return to the default screen display.
Press the Back or ‘M’ key to return the radio to the main Scan Edit screen.
When the OK key is pressed:
• If the scan group has less than 15 member channels, the selected non-member
channel is added to the scan group. If scan is enabled on the current channel, the
radio will resume scanning. The radio returns to the default screen. The added
channel is permanent.
• Otherwise, an error beep will sound, and the radio will return to the default
screen.
Doc Number: TNM-U-E-0055 ISSUE 4.0 Page 60
To Next Page
Loading...
Need help?
General
