Simplex 100 User Manual

PROGRAMMING
16
To Change Daylight Saving Time (DST) BACK
Use the following steps to set the day (at 2:00 AM) on which the Simplex 100 will set the time
back to normal.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears next to BACK.
Press CHANGE once.
• The week number begins to blink.
Press CHANGE until the desired number (1st, 2nd, 3rd, 4th, or last week of the month) is
displayed.
Press ACCEPT to set the number shown.
• The month begins to blink.
Press CHANGE until the desired month is shown.
Press ACCEPT to set the month shown.
• The day begins to blink.
Press CHANGE until the desired day of the week is shown.
D. Press ACCEPT to set the DST BACK options shown on the display.
• The programming arrow moves to the next option (go to Step C of To Set the Language).
Note: To turn off the DST option, reprogram the DST option to display all dashes.
C.

Simplex 100 Specifications

General

Brand	Simplex
Model	100
Category	Time Clocks
Language	English