Simplex 100 User Manual

PROGRAMMING
18
To Set an Alarm
Use the following steps to set the Simplex 100 to ring up to 24 alarms (or bells) at a specified time
during the day or night.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears above ALARM.
Press CHANGE once.
• The first ALARM option begins to blink.
Press CHANGE again.
• The hours begin to blink.
Press CHANGE until the desired hour is displayed.
Press ACCEPT to set the hour shown.
• The minutes begin to blink.
Press CHANGE until the desired minute is displayed.
Press ACCEPT to set the minutes shown.
• The next alarm option begins to blink. Use the steps above to set additional alarms.
D. Press ACCEPT to set the alarms.
• The programming arrow moves to the next option (go to Step C of To Set the Print
Direction).
C.

Simplex 100 Specifications

General

Brand	Simplex
Model	100
Category	Time Clocks
Language	English