Singer XL-420 User Manual

38
1
2
1 2
4
3
A
B
A
0HGLXPWRKHDY\ZHLJKWIDEULF
0DWHULDOGHSHVRPHGLRDSHVDGR
Tissus moyens et lourds
Under side
Reverso
Envers
Under side
Reverso
Envers
Under side
Reverso
Envers
Under side
Reverso
Envers
Fine fabric
0DWHULDO¿QR
7LVVXV¿QV
Top side
Cara
Endroit
BLIND STITCH
 )LUVW¿QLVKWKHUDZHGJH'RWKLVE\WXUQLQJLWXQGHURQ¿QH
fabrics or overcasting it on medium to heavyweight fabrics.
Then turn the hem up the required depth, press and pin in
place.
2. Now fold the fabric as illustrated.
3. Place the fabric under the foot. Turn the handwheel counter
FORFNZLVHWRZDUG\RX E\ KDQGXQWLOWKHQHHGOH VZLQJV IXOO\
to the left. It should just pierce the fold of the fabric. If it does
not, adjust the guide (B) on the Blind hem Foot (A) so that
the needle just pierces the fabric fold and the guide just rests
against the fold.
Sew slowly, guiding the fabric carefully along the edge of
the guide.
4. When completed, the stitching is almost invisible on the
right side of the fabric.
SETTINGS :Presser foot - Blind Hem Foot
:Thread tension control - S
- Regular blind stitch for normal fabrics
- Elastic blind stitch for soft, stretchable fabrics
NOTE: For a narrower or wider blind hem, first
manually adjust the length and width controls to
your desired length and width. Then adjust the
guide on the foot.
NOTE: It takes practice to sew blind hem. Always
PDNHDVHZLQJWHVW¿UVW

Singer XL-420 Specifications

General

Brand	Singer
Model	XL-420
Category	Sewing Machine
Language	English