Operation description - Variant with CCS
pav. 280
Controls the speed limiter (va-
riant with CCS)
Pirmiausiai perskaitykite ir atkreipkite dėmesį į puslapyje 232.
Greičio ribotuvo valdymo elementų apžvalga » pav. 280
A
Activate CCS (required condition for the subsequent activation of
the speed limiter)
To activate the speed limiter, set the switch to position , then
press
D
.
Interrupt control (sprung position)
Disable speed Limiter (delete set limit )
B
Take control again
a)
/ increase speed limit - press (in increments of
1 km/h), hold (in increments of 10 km/h)
C
Start control/ reduce speed limit - press (in increments of 1 km/h),
hold (in increments of 10 km/h)
D
Switching between CCS and speed limiter
a)
If no speed limit is set, the current speed is set as the speed limit.
Nurodymas
By pressing the button
D
» pav. 280 during the regulation this is cancelled and
the CCS is activated.
Operation description - Variant with ACC
pav. 281 Controls the speed limiter (variant with ACC)
Pirmiausiai perskaitykite ir atkreipkite dėmesį į puslapyje 232.
Greičio ribotuvo valdymo elementų apžvalga » pav. 281
1
Activate ACC (required condition for the subsequent activation
of the speed limiter)
To activate the speed limiter, set the lever to position , then
press
B
to operate.
2
Resume control
a)
/ increase speed limit by 1 km/h at a time
(sprung position)
3
Reguliavimo nutraukimas (spyruokliuojanti padėtis)
4
Disable speed Limiter (delete set limit )
5
Increase speed limit by 10 km/h at a time
6
Decrease speed limit by 10 km/h at a time
A
Start control / reduce speed limit in increments of 1 km/h
B
Switching between ACC and speed limiter
a)
If no speed limit is set, the current speed is set as the speed limit.
Adaptive Cruise Control (ACC)
Įvadas į temą
The Adaptive Cruise Control (hereinafter referred to as ACC) maintains the set
speed and at the same time the distance to the vehicle ahead without the ac-
celerator or brake pedal being pressed.
234
Driving
To Next Page
Loading...
