HEC-OM-S002
Chapter 3 Transporting and Installation
3.2 Installation
3-2
3.2 Installation
3.2.1 Installation Conditions
z
Outdoor
z
Altitude higher than 2000m.
z
Environments containing splashing water, salt water, oil, or various
chemicals (including chemical mists).
z
Environments containing particles and dust.
z
Environments containing corrosive gas, solvents and flammable gas.
z
Envirnoments containing direct sunlight and radiant heat.
z
Environments having ambient temperatures over the following range:
Operation 10 to 35
o
C
Storage 0 to 50
o
C (with no liquid in the bath and facility water
circuit.)
z
Environments having ambient humidity over the following range:
Operation 35 to 80%
Storage 35 to 85%
z
Environments with sharp temperature changes.
z
Environments generating strong magnetic noise (having a strong electric
or magnetic field that generates surges).
z
Environments generating electrical static discharge and conditions in
which static electricity is applied to this product.
z
Environments generating strong high frequency radiation (including radio
frequency appliances such as mobile phones and tranceivers).
z
Environments generating strong vibrations and impacts.
z Keep enough open space to access main power switch and any
cable connections.
z Keep enough ventilation for liquid vapor.
z This product should be installed on a vibration-free stable level
place.
z The mounting orientation of this product is horizontal.
z Place the product in a flat area which can handle its weight and
take measures to prevent the tipping of the product. If installed
improperly, the product might leak liquid or topple, resulting in
in
ur
.
z Do not use this product in the following environments, where the
product may not work normally and may be damaged.
To Next Page
Loading...
Need help?
General
