SMC Networks INR-244-780 User Manual

HEC-OM-S002
Chapter 5 Operation
5.1 Operation of Controller
5-3
5.1.3 Selection of Operation Mode
When the power supply is turned on, the product is in operation mode. The
target temperature is shown as well as the current measured temperature.
Each press of the [MODE] key changes the operation mode display as
follows.
Mode indicator
<1>
(Temp.)
Target Temp./Measured Temp. Indication and Target Temp. Setting
↓
[MODE] key
<2>
Offset Setting
↓
[MODE] key
<3>
Heating Output Indicator
↓
[MODE] key
<4>
Cooling Output Indicator
[MODE] key
[FUNC] key
z Set as a digit transferring key for the initial setting. If this setting is changed,
the RUN/READY key can be used as an auto tuning key.

SMC Networks INR-244-780 Specifications

General

Brand	SMC Networks
Model	INR-244-780
Category	Laboratory Equipment
Language	English