- 12 - Rev 2
6. Accessories
Connector cables (recommended – not included with ITV)
One end: molded M12 straight connector. Other end: RJ45
connector (Ethernet).
One end: molded M12 right angle connector. Other end:
flying leads.
Both ends: molded M12 straight connectors.
Field wire-
able
Connector
Connector: M12 straight plug connector. Use with PCA-
1446566 to make a cable of desired length.
One end: molded M12 straight connector. Other end: flying
leads.
One end: molded M12 right angle connector. Other end:
flying leads.
Cable with
Speedcon
connector
One end: molded M12 straight connector. Other end: flying
leads.
Figure 2 - Recommended Cables
Note: More options are available. Contact SMC for information on these options.
Seal cap
Seal caps are used to protect the M12 size connector openings. It is recommended that seal
caps be used on all unused M12 connector openings. Use of seal caps is required for all unused
connections for IP65 rating.
(One Ethernet and one Power seal cap are attached to the ITV when shipped from factory.)
For M12 connector socket: 10pcs.
For M12 connector socket: 1pcs.
Cap and Gasket for M12 Female Connector 1
pcs.
Figure 3 - Seal Cap Part Numbers