SMC Networks PFM7 Series User Manual

-20-
No.PF※※-OMJ0006-G
Flow Setting
Measurement mode
The mode in which the flow is detected and displayed, and the switch function is operating.
This is the basic operating mode; other modes should be selected for set-point and other Function Setting
changes.
Switch operation
When the flow exceeds the set value, the switch will turn ON.
When the flow falls below the set value by the amount of hysteresis or more, the switch will turn OFF.
If this condition, shown to the right, is acceptable, then keep these settings.

SMC Networks PFM7 Series Specifications

General

Brand	SMC Networks
Model	PFM7 Series
Category	Switch
Language	English