SMC Networks PFM7 Series User Manual

-31-
No.PF※※-OMJ0006-G
■[F 6] Display mode
Select instantaneous flow or accumulated flow to be displayed.
<Operation>
Press the or button in function selection mode to display [F 6].
Press the button.
Press the button. Return to function selection mode.
[F 6] Selection of display mode completed
Accumulated flow measurement starts when the accumulated flow display is selected.
Although the
accumulated
flow value is measured up to 999999 L, normally only the lower 3 digits are
displayed.
Press and hold the button to display the upper 3 digits.
Press the and
buttons for 1 second or longer to reset the accumulated flow value.
Select display mode
[dSP] and the set value are displayed in turn.
Press the or button to select.

SMC Networks PFM7 Series Specifications

General

Brand	SMC Networks
Model	PFM7 Series
Category	Switch
Language	English