To Next Page

To Previous Page

Flash/File Commands

4-67

This example shows how to copy a public-key used by SSH from a TFTP server.

Note that public key authentication via SSH is only supported for users configured

locally on the switch:

delete

This command deletes a file or image.

Syntax

delete [unit:] filename

filename - Name of the configuration file or image name.

unit - Stack unit. (Always unit 1)

Default Setting

None

Command Mode

Privileged Exec

Command Usage

• If the file type is used for system startup, then this file cannot be deleted.

• “Factory_Default_Config.cfg” cannot be deleted.

• A colon (:) is required after the specified unit number.

Example

This example shows how to delete the test2.cfg configuration file from flash memory

for unit 1.

Related Commands

dir (4-68)

delete public-key (4-38)

Console#copy tftp public-key

TFTP server IP address: 192.168.1.19

Choose public key type:

1. RSA: 2. DSA: <1-2>: 1

Source file name: steve.pub

Username: steve

TFTP Download

Success.

Write to FLASH Programming.

Success.

Console#

Console#delete 1:test2.cfg

Console#

SMC Networks SMC8126L2 User Manual

Other manuals for SMC Networks SMC8126L2