VLAN Commands
4-167
4
Syntax
show garp timer [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Example
Related Commands
garp timer (4-166)
Editing VLAN Groups
vlan database
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Command Mode
Global Configuration
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 100 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Table 4-55 Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add, change, and delete
VLANs
GC 4-167
vlan Configures a VLAN, including VID, name and state VC 4-168
To Next Page
Loading...
Need help?
General
