48
GB
t If power failure occurs, set [Control for HDMI]
to [Off], then set [Control for HDMI] to [On]
(page 40).
t Check the following and refer to the operating
instructions supplied with the component.
• The connected component is compatible with
the [Control for HDMI] function.
• The connected component’s setting for the
[Control for HDMI] function is correct.
The system cannot connect to the network.
t Check the network connection (page 16) and
the network settings (page 41).
You cannot connect your PC to the Internet
after [Wi-Fi Protected Setup (WPS)] is
performed.
t The wireless settings of the router may change
automatically if you use the Wi-Fi Protected
Setup function before adjusting the settings of
the router. In this case, change the wireless
settings of your PC accordingly.
The system cannot connect to the network or
the network connection is unstable.
t Check if the wireless LAN router is on.
t Check the network connection (page 16) and
the network settings (page 41).
t Depending on the usage environment,
including the wall material, radio wave
reception conditions, or obstacles between the
system (or USB wireless LAN adapter) and the
wireless LAN router, the possible
communication distance may be shortened.
Move the system and the wireless LAN router
closer to each other.
t Devices that use a 2.4 GHz frequency band,
such as a microwave, Bluetooth, or digital
cordless device, may interrupt communication.
Move the unit away from such devices, or turn
off such devices.
The desired wireless router is not shown in
the wireless network list.
t Press RETURN to return to the previous
screen, and try [Wireless Setup(built-in)]/
[USB Wireless Setup] again. If the desired
wireless router is still not detected, select
[Manual registration].
Network connection
Wireless LAN connection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
