Viewing images on a TV
1
Connect the camera to the TV with the cable for multi-use
terminal (supplied).
m.
:0
au?io/video
~,nput
Jacks
F==T'======:::::::::
Cable for multi-use terminal
• The [Video Out] setting
is
set to [NTSC] mode at the factory to let you enjoy optimum movie
image quality. When images do not appear or jittery on your TV, you may be using a PAL-only
TV. Try switching the [Video Out] setting to [PAL] (page 49).
Printing still images
If
you have a PictBridge compliant printer, you can print images by the following
procedure.
First, set the camera to enable USB connection between the camera and the printer.
1
Connect the camera to the printer with the cable for multi-
use terminal (supplied).
38
GB
2 Turn
on
the printer.
After the connection
is
made, the
f(
indicator appears.
To Next Page
Loading...
Need help?
General
