Still image editing
77
• If you mark an image shot in TIFF mode with a
print (DPOF) mark, only the uncompressed
(TIFF) image is printed, and the JPEG image
recorded at the same time is not printed.
In single-image mode
a Set the mode dial to .
b Display the image you want to
mark with
b/B.
c Press MENU.
The menu appears.
d Select [DPOF] with b/B, then
press
z.
The mark is marked on the
displayed image.
e To continue and mark other
images, display the desired
image with
b/B, then press z.
To unmark the mark
Press z again in step 4 or 5. The
mark disappears.
In index (nine-image) mode
a Set the mode dial to , then
press
/ (index) to display
the index (nine-image) screen.
b Press MENU.
The menu appears.
c Select [DPOF] with B, then
press
z.
d Select [Select] with
b/B, then
press
z.
• When marking marks, you cannot
select [All In Folder].
e Select the image you want to
mark with
v/V/b/B, then press
z.
The green mark appears on the
selected image.
f Repeat step 5 to mark other
images.
101
2/9
VGA
60
min
DPOF
Exit
BACK/NEXTOK
TO NEXT
MENU
MOVESELECT
To Next Page
Loading...
Need help?
General
