78
g Press MENU.
h Select [OK] with B, then press
z.
The mark turns white. The
mark setting is completed.
To unmark marks
Select the images to be unmarked in step
5, then press z.
To unmark all the marks in
the folder
Select [All In Folder] in step 4, then press
z. Select [Off], then press z.
To exit the mark function
Select [Cancel] in step 4, or select [Exit]
in step 8.
In index (triple-image) mode
a Set the mode dial to , then
press
/ (index) twice to
display the index (triple-image)
screen.
b Display the image you want to
mark in the center position
with b/B.
c Press MENU.
The menu appears.
d Select [DPOF] with v, then
press
z.
The mark is marked on the center
image.
e To continue and mark other
images, display the image you
want to print in the center
position with
b/B, and repeat
step 4.
To unmark the mark
Press z again in step 4. The mark
disappears. Repeat this operation for all the
images you want to unmark.
10:30PM2003 7 4101-0002
Protect
DPOF
Folder
BACK/NEXTOK
To Next Page
Loading...
Need help?
General
