24
DSR-200 U/C 3-858-622-22(1). E
Inserting a cassette
Use a standard DVCAM cassette with logo*.
Make sure that a power source is installed.
We recommend you set the POWER switch to ON before inserting the cassette.
(1) Open the cassette compartment cover.
(2) Insert a cassette (not supplied) with the tab upwards, and the window facing out
and press down so that the cassette loads.
(3) Close the cover.
Note on the cassette
Mini DVCAM cassettes and Mini DV cassettes cannot be used.
* is a trademark.
1
3
2
EJECT6
To Next Page
Loading...
Need help?
General
