To Next Page

To Previous Page

DSR-200 U/C 3-858-622-22(1). E

Searching the recorded picture

When you use a cassette memory-mounted DVCAM cassette ( logo*) which can

store the recorded date and time, etc., you can search the recorded picture with the date

or time using the Remote Commander (Cassette memory search). You can also search

the photo-recorded pictures only, or the recorded picture in the backward and forward

direction from the present position without cassette memory.

* is a trademark.

Searching the recorded picture with the date or time – Cassette

memory search

(1) Set the POWER switch to ON, then set CAMCORDER/VTR to VTR.

(2) Open the cover, press MENU to display the menu in the viewfinder.

(3) Set CM SEARCH to ON in the menu system.

(4) Press MENU to erase the menu display.

(5) Press SEARCH MODE on the Remote Commander to select date search (search

with the date) or photo search (search the photo recorded-pictures only).

(6) On the Remote Commander, press + to search forward or = to search

backward.

Notes on cassette memory search

• You can search up to 24 days for date search and 179 pictures for photo search when

you use the 16k-bit cassette memory.

• Make sure that the lithium battery is installed if using cassette memory.

CAMCORDER

VTR

PHOTO SEARCH

1 OCT/ 24/96 8:52 PM

2 NOV/ 3/96 10:29 AM

3 NOV/ 23/96 8:12 AM

4 DEC/ 24/96 4:15 PM

5 DEC/ 25/96 9:43 PM

6 JAN/ 1/97 12:05 PM

DATE SEARCH

1 OCT/ 24/96

2 NOV/ 3/96

3 NOV/ 23/96

4 DEC/ 24/96

5 DEC/ 25/96

6 JAN/ 1/97

MODE

POWER

OFF ON