Step
4:
Preparing
for
recording
LCD
panel
Open the LCD panel 90 degrees to the
camcorder
(CD),
then rotate it
to
the best
angle to record or play
(0).
eD90
degrees to the
®90
degrees camcorder
(max.)
DISP/BATT INFO
®1
degrees
(max.)
To
turn
off
the
LCD
backlight
to
make
the
battery
last
longer
Press and hold DISPIBATT INFO for a few
seconds until
;C6~F
appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold
DISPI
BATT INFO for a few seconds until
:C6~F
disappears.
" Notes
• Do not press the buttons on the LCD frame
when you open or adjust the LCD panel.
.~.
Tips
• If you open the LCD panel 90 degrees to the
camcorder, then rotate
it
180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This
is
convenient during
playback operations.
• On the HOME MENU,
touch;;
(SETTINGS)
--
[SOUNDIDISP SET]
--
[LCD BRIGHT]
(p. 72) to adjust the brightness of the LCD
screen.
• The information
is
displayed or hidden (display
.........
no
display) each time you press DISP
BATT/INFO.
Viewfinder
You can view images using the viewfinder
to
avoid wearing down the battery, or when
the image seen on the LCD screen is poor.
Viewfinder
Viewfinder lens
adjustment lever
Move it until the
image becomes
clear.
.~.
Tips
• You can adjust the brightness of the viewfinder
backlight
by
selecting
;;;
(SETTINGS)
--
[SOUND/DISP SET]
--
[VF B.LIGHT] on the
HOME MENU (p. 73).
C)
CD
-
=:
:::s
IQ
en
-
Q)
...
-
CD
CL
27
To Next Page
Loading...
Need help?
Imaging
Audio
Display
Power
